Exhaust-O-Vent Weld-O-Vent Gas Detection Systems Local Representatives
 







CS 102A Data Sheet
SS 102HC-1 Data Sheet




CARBON MONOXIDE TRANSDUCERS

CS102A

• CO Detector used with Macurco SS 103 Controllers or other control systems.
• Microcomputer controlled operation.
• Highly linear output.
• Re-calibration in the field with optional kit.
• Every unit factory calibrated.
• Multi-colored operational status LED light.

SS1O2HC-1

• CO Detector used with Macurco SS1O3 Controllers or other control systems.
• Microcomputer controlled operation.
• Dual output (ma and volts), internal switch.
• Re-calibration in the field with optional kit.
• Every unit factory calibrated.
• Multi-colored operational status LED light.

Internal combustion engines (cars, forklifts, etc.) produce carbon monoxide (CO), an odorless, colorless and deadly gas. Operators of enclosed parking garages, warehouses, maintenance facilities, etc., can protect people by either ventilating, continuously or installing automatic fan control systems like the Macurco CSIO2/SS102/SS1O3 System. Automatic fan control systems in parking garages normally have a short payback, because fans operate I to 2 hours a day rather than 24 hours a day. TheCS1O2A and SSIO2HC-1 are powered from Macurco or other controllers, and provide a linear output to the controller. The CS1O2A and SSIO2HC-1 conform to the specifications of most building codes, ASHRAE standards, and occupational health regulations. Typical codes require that CO exposure be 1: 35 PPM or less on the TWA (Time Weighted Average) basis over 8 hours, and 2: 200 PPM or less on the STEL (Short Term Exposure Limit) basis over a one hour period. Typical coverage is 5000 sq. ft. (464.5 sq. meters) per unit. The CS102A uses an electrochemical sensor with a life of up to 5 years. The SSIO2HC-1 uses a long life (7 - 10 year) solid state sensors that does not require regular re-calibration. The CS102A replaces the SS I 02H.

CS102A SPECIFICATIONS

POWER: 1 Watt, 12 to 24 Vac or Vdc
OUTPUT: 1.0 to 2.88 Volts
RANGE: 0 to 250 ppm of CO
SIZE: 5 x 4 1/2 x 1/2 inches
SHIPPING WEIGHT: 1 pound
COLOR: Gray
OUTPUT LINEARITY: ± 1%
ACCURACY (after calibration): ± 3%
RESPONSE TIME: 30 seconds
OPERATING ENVIR.: < 0 to 125 F 10 to 90% RH

CS102HC-1 SPECIFICATIONS

POWER: 1 Watt, 12 to 24 Vac or Vdc
OUTPUT: 1.0 to 2.88 Volts or 4 to 20ma
RANGE: 0 to 250 ppm of CO
SIZE: 4.5 x 4.5 x 2.1 inches
SHIPPING WEIGHT: 1 pound
COLOR: Gray
OUTPUT LINEARITY: ± 10%
REPEATABILITY: ± 10%
RESPONSE TIME: 150 seconds
OPERATING ENVIR.: < 0 to 125 F 10 to 90% RH


Manufacured By: Macurco Inc.

Distributed By Engwald







Home | Contact Us | Exhaust-O-Vent | Weld-O-Vent | Blowers | Accessories | Gas Detection Systems | Local Representatives